NeoNail UV/LED Manicure & Pedicure Rubber Base 7.2ml

Discover the hot novelty from NeoNail, which will take your manicure to a new level.

Rubber Base is very flexible, thanks to which it works beautifully on the nail.

The Rubber Base is perfect not only for manicures, but also for pedicures.

See why it is so special! 

* Medium thick consistency that facilitates the application of the base on the nails;

* Nourishing properties, because the composition is enriched with vitamin B3 (Niacinamide), collagen, cotton proteins and soy milk proteins;

* The formula is ideal for thin, weakened and brittle nails;

* Great adhesion without the use of a primer;

* Strengthening, the possibility of building the nail and extending it up to 4 mm;

* Ease of application - a short, appropriately contoured brush helps in this;

* Time saving - it is enough to refill the base without removing it from the nails;

* The product is intended for colored hybrid varnish, as well as for independent use. When applied solo, it gives the nails a beautiful, healthy shine.

Application:

Version without the application of colored hybrid varnish:

1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.

2. Apply a thin layer of Rubber Base on the prepared nail plate, cure in the LED or UV lamp according to the table.

3. Apply a second, slightly thicker layer on the nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. To obtain the proper structure of the nail, the operation should be repeated.

4. After hardening, gently remove the template and smooth the nails with a 180-grit file. Remove the dust formed, then rinse with a cotton pad soaked in Cleaner.

5. Finally, apply a thin layer of the same Rubber Base or Hard Top product, and cure in a LED or UV lamp according to the table. After curing, rinse the sticky layer with Cleaner.

Version with the application of colored hybrid varnish:

1. Gently polish the nail with a polisher, remove the dust formed, then rinse with a Cleaner.

2. Apply a thin layer of Rubber Base on the prepared plate, and cure in a LED or UV lamp according to the table.

3. Apply a second, slightly thicker layer on the natural nail and on the template (if you decide to extend it). Cure the whole in a LED or UV lamp according to the table. In order to obtain the proper structure of the nail, the operation should be repeated.

4. After hardening, gently remove the template and smooth the nails with a 180-grit file. Remove the dust formed, then rinse with a cotton pad soaked in Cleaner.

5. Apply a layer of hybrid varnish in the selected color and cure in the LED or UV lamp according to the table (the darker the color, the longer the curing time). Repeat the operation to obtain a depth of color.

6. At the end, apply a thin layer of Hard Top, cure in a LED or UV lamp according to the table. After curing, rinse the sticky layer with Cleaner.

Capacity: 7.2ml